• Supplying The UK Since 1972

    Supplying The UK
    Since 1972

  • Delivered From Stock Within One Week

    Delivered From Stock
    Within One Week

  • Quality Products Manufactured In The UK & Europe

    Quality Products Manufactured
    In The UK & Europe

  • Technical Support With System Advice

    Technical Support With
    System Advice

  • Supplying The UK Since 1972

    Supplying The UK
    Since 1972

  • Delivered From Stock Within One Week

    Delivered From Stock
    Within One Week

  • Quality Products Manufactured In The UK & Europe

    Quality Products Manufactured
    In The UK & Europe

  • Technical Support With System Advice

    Technical Support With
    System Advice

Wall Mounted Heating & DHW Substations 34KW to 116KW

INSTANTANEOUS CENTRAL HEATING HEAT EXCHANGERS (SYSTEM BREAK)

When Central Heating or Domestic Hot Water is required for buildings with Multiple rooms or areas such as Hotels, Multi story apartments, Hospitals, Office blocks etc it is now common to install an individual AEL substation in or near that specific area to efficiently serve the individual demand required at different times of the day or week.

The primary hot water to each substation comes from a boiler (or similar) via the main central heating plant room rather than individual boilers being installed throughout a building or the plant room just working to heat the whole building inefficiently.

Not only is it more efficient to control the Heating and DHW demand to individual areas or apartments but it also makes financial sense when looking at maintaining the individual sub stations.

An AEL district heating substation is a fully pre-assembled, pre-cabled unit for heat transmission, featuring high yield and maximum operating safety. The structure consists of a zinc-plated frame covered with protective jackets in painted sheet metal which define the overall dimensions of the substation and housing.

An AEL district heating substation is a fully pre-assembled, pre-cabled unit for heat transmission, featuring high yield and maximum operating safety. The structure consists of a zinc-plated frame covered with protective jackets in painted sheet metal which define the overall dimensions of the substation and housing.