Whether you require Tips and Advice about radiators, plate heat exchangers or heating systems in general AEL have the technical expertise to provide guidance on your system design and which products are best suited to your application.
Should you not find the answer to your problem in our “Tips and Advice” articles and require any help feel free to contact our technical sales office.
Delivery Terms & Conditions
- AEL will contact you during the next working day to discuss a convenient delivery date of your order.
- Orders delivered by road transport are delivered to the nearest convenient hard standing position and the consignee is responsible for offloading.
- Standard delivery is between 9am and 5pm on weekdays only, prices for timed deliveries and weekend deliveries can be provided by our sales office upon request.
- Please note that missed deliveries can be rescheduled and are chargeable.
- We're open 9am to 5pm weekdays with Saturday collections possible by prior arrangement.
- Please note that Cast Iron Radiators are heavy so we advise that you double check the weight of your order and the maximum weight your vehicle can carry as AEL can accept no responsibility for the suitability of your vehicle.
PLATE HEAT EXCHANGER DESIGNS and APPLICATIONS
Plate Heat Exchangers are generally available as either Brazed, Shell and Tube sealed units or as a Plate and Gasket type that can be opened for servicing or to alter the number of plates.
Plate Heat Exchangers provide an instantaneous supply of water and most other fluids while maintaining the required set point temperature within 1 or 2 degrees for your specific application.
Should the system design change in future the plate and gasket plate pack can be redesigned by removing, adding or changing the plate pack within the frame but the brazed plate heat exchanger plates are fixed and the design can only be changed by increasing or decreasing the flow rate, temperature or primary KW input.
DOMESTIC HOT WATER (DHW) PLATE HEAT EXCHANGERS
Domestic Hot Water (DHW) Plate Heat Exchangers can be supplied as a Plate / Gasket unit or supplied as a Brazed Plate unit. In practice both types of heat exchanger transfers energy from hot or cold fluid and ensures that the Primary circuit does not mix with the Secondary circuit therefore creating two completely independent separate heating or cooling circuits.
It is common practice to install a packaged plate heat exchanger with controls in a DHW application as the temperature needs to be controlled properly so as not to scald anybody.
USING PLATE HEAT EXCHANGERS AS A CENTRAL HEATING SYSTEM BREAK
Using a Plate heat exchanger as a central heating system break to protect an expensive piece of equipment such as a commercial sized boiler is a very common practice.
Plate heat exchangers are used in these applications to separate the central heating system into two circuits, one Primary circuit dedicated to the boiler which heats up the Secondary circuit that feeds the radiators and associated equipment.
The general idea of the Central Heating System Break is to separate the heating into two circuits so that any deposits floating around an old heating system will not damage or shorten the life of the expensive boiler.
PACKAGED PLATE HEAT EXCHANGERS
Systems requiring Packaged Plate Heat Exchangers usually require very close temperature control. These units are usually skid mounted and can be fully or partially controlled c/w control panel, pumps, diverting valves and control thermostats.
BRAZED PLATE HEAT EXCHANGERS
Brazed plate heat exchangers are very compact and have no bolts or frame and are usually used on low output installations. Since they cannot be opened any necessary cleaning is done by circulating chemicals around the plates.
The number of plates on a Brazed plate heat exchanger plates are fixed which means that the Central Heating or Domestic Hot Water (DHW) design duty can only be changed by increasing or decreasing the flow rate, temperature or primary KW input.
PLATE AND GASKET HEAT EXCHANGERS
The advantage that a Plate and Gasket type heat exchanger has over a Brazed type is that they do come with bolts within a frame and can be opened for servicing / cleaning or to alter the number of plates to change the performance / duty at a later date by increasing or decreasing the flow rate, temperature or primary KW input.
SWIMMING POOL PLATE HEAT EXCHANGERS
Swimming Pool heat exchangers must be robust and purpose made to cope with the corrosive atmosphere and water in a swimming pool environment.
The AELtherm SP fully controlled packaged Swimming Pool Plate Heat Exchangers tend to be most popular with medium to larger new build pools. Whilst the Shell and Tube and Bare Plate heat exchangers are also popular with new build but they are more popular as replacements for older equipment that have failed as they can easily be incorporated into an existing system utilising the existing pumps and controls.
Most Plate Heat Exchanger Designs for Central Heating, Domestic Hot Water and Swimming Pools tend to be the same or very similar 90% of the time so with this in mind AEL have provided all the cost prices and technical information required for each application from 30KW up to 1000KW as a standard design so that they can be viewed and purchased online.
AEL Plate Heat Exchangers have been used to heat and cool many types of fluids in the UK for over 35 years and they all operate the same way in principle whether assembled as a Plate and Gasket unit, Brazed or supplied as a Shell and Tube unit.
In practice all three types of heat exchanger transfers energy from a hot or cold fluid and ensures that they do not mix by creating two completely independent separate heating or cooling circuits.
Please see the link below and feel free to send over any questions or enquiries you may have.